Interactive demo
See Stampwise work
on a sample RFQ.
1 Requirements
Every requirement with the clause it came from. Click a line to see its source.
2 Gaps and questions
Missing data and conflicts become a draft clarification list for the customer.
To Customer procurement, Demo Customer (fictional)
Subject DEMO-26 / V-101 Inlet Separator: technical clarifications
Draft for estimator review
3 Quotation workbook
Draft lines with quantities and sources. Lines that depend on open questions stay on hold.
| # | Line | Qty | Source | Price |
|---|---|---|---|---|
| 1 | Shell plate SA-516 Gr.70N, 14 mm, two courses | 2.6 t | §5.1 · DS · UG-27 | Hidden |
| 2 | 2:1 semi-ellipsoidal heads, 14 mm min. after forming | 2 ea | §5.1 · DS · UG-32 | Hidden |
| 3 | Nozzles N1 to N4 and manway M1, Class 300 RF | 5 ea | DS | Hidden |
| 4 | RT 100%, Category A and B seams | 19.9 m | §6.1 | Hidden |
| 5 | Hydrostatic test per UG-99 | 1 lot | §6.4 | Hidden |
| 6 | Painting | HOLD | §7.2 · Q2 | Hidden |
| 7 | Skirt | HOLD | DS · Q4 | Hidden |
Prices are hidden in this demo. In a pilot they come from your own price references and rates. Quantities use 3 mm corrosion allowance until Q1 is answered.
4 ASME checks
Thickness checks run in deterministic code, not in the language model.
Shell · UG-27(c)(1)
- Required thickness
- 12.08 mm (9.08 pressure + 3.00 CA)
- Selected
- 14 mm SA-516 Gr.70N
- Allowable stress at 120 °C
- 138 MPa
- MAWP, corroded
- 1.87 MPa vs 1.55 MPa design
PASS
2:1 heads · UG-32(c)(1)
- Required thickness
- 12.01 mm (incl. 3.00 CA)
- Selected
- 14 mm min. after forming
- Joint efficiency
- 1.0 (100% RT, §6.1)
- MAWP, corroded
- 1.90 MPa vs 1.55 MPa design
PASS
Computed by the Stampwise ASME engine (Section VIII Division 1, 2023 edition) for this fictional vessel, with allowable stress from the material database. Static head is not yet included: the bottom head is rechecked once Q3 gives the liquid levels. Pressure margins of 0.32 MPa (shell) and 0.35 MPa (heads) are reported to the estimator.
Want to see this on one of your own RFQ packages?
Request a pilot